Foundry Service

Device List

Device List for Analog Power

For mixed signals (analog hybrids), we offer 8 V to 60 V devices for the 0.13 μm series.

Process Type CD-0.13G2 CD-0.13G3
(With buried layers)
BiCD-0.13
CMOS Power Supply
(Vdd)
1.5/5.0V 1.5/5.0V 1.5/5.0V
DMOS 8V, 18V, 25V, 30V,
40V
8V*, 18V, 25V, 30V*,
40V, 50V, 60V*
25V, 40V, 50V, 60V,
80V*, 96V*
Bipolar / Diode 5V NPN, 5V PNP 5V NPN, 5V PNP
8V NPN*, 8V LPNP*
Isolated Diode*
18V~60V Diode
30V NPN, 30V PNP
Isolated Diode
10V~40V Diode
Metal Cu AL Cu
NV-Memory e-Fuse e-Fuse e-Fuse
Layers 1P3M~ 1P3M~ 1P3M~
Standard PDK Design Rule, Spice Model, Device Parameters,
Check Command File (DRC, LVS)
Design Interface GDS interface
Others MOS-Cap, MIM-Cap, MOM-Cap, Zener, UTM(Cu 3.5μm, Al 3μm),
Cu plating(5.5μm~), Zero-TCR, MR/HR, SHR

* Under development

Device List for Logic

For the CMOS process, we offer the 0.13 μm series.

  CMOS 0.13μm
Power Supply Voltage (Vdd) 1.5/3.3 V 1.5/5 V 3.3V or 5V *1
Embedded Memory SRAM
E-Fuse
OTP - ✔ (5V only)
Layers 1P1M~1P6M 1P1M~1P6M 1P1M~1P6M
Salicide Co salicide Co salicide Co salicide
Standard PDK Design Rule, Spice Model, Device Parameters,
Check Command File (DRC, LVS)
Design Interface GDS interface

*1 For choosing single voltage
* MTP process planning is in progress.

▲Back to top